by isidro kinney | Total Views: 0
The purpose of building standards covered within California Building Code 15.154.010 is to ensure higher quality of fixtures installed for disabled individuals. It enforces building structures, which present new homeowners with the ability to add onto an existing property to accommodate family members with disabilities. The standards are also in place to prevent increases in pricing to include these features in which the property becomes unaffordable to potential buyers due to the necessary renovations. If you need assistance with these requirements, you should contact ADA Accessibility Renovations promptly.

Reviewing Property Requirements for Accessibility

As covered in the California Building Code Section 15.154.060, all building in which housing is offered to disabled individuals must provide clear entry points. If you operate an apartment complex in which you have multiple floors, you need to consult a dumbwaiter to accommodate these requirements. According to these standards, they must have the elevator buttons at roughly forty inches from the flooring to allow accessibility.

The exterior of the property should have a slope or ramp which allows easy access for entry into the property for all disabled individuals. The entry point should measure at least thirty-four inches to allow entrance of wheelchair-bound residents. Design standards for the entry points also cover peepholes and doorbells. The peepholes should measure no more than forty-four inches from the flooring, and the doorbell should be roughly forty-eight inches away. These are the measurements used by a home elevator contractor when a new construction is built.

Design Features in Kitchen and Bathrooms

Residential properties promote independent living for disabled individuals by providing installed features to make life easier for them. Bathroom fixtures such as railings around the toilet and seats inside the bathtub or shower enable them to transition through their daily tasks without facing difficulties. These building code standards are covered in Section 15.154.060.

The route used to navigate through the property to these areas should be at least forty-two inches wide. The doorway into the bathroom and kitchen should be no less than thirty-four inches to allow wheelchair accessibility. These measurements should extend to all floors of the property in which the impaired individuals venture.

The purpose of these building codes are to ensure that all disabled residents achieve accessibility throughout the property. A contractor works with the property owner to determine the exact measures required based upon the size of the wheelchair or crutches used by the resident. To establish whether your rental property meets all state standards, you should schedule an inspection with an accessibility contractor promptly.

Report this blog